9 Servicing
Removing components
SMGB0091 rev.2 - 11/2015
175
9
9.3.18 Removal of the electrical components (for 8/10 HP)
!
D A N G E R
Electrical hazard. Risk of death.
• Do not touch the electrical components when LED1 (Red) of PCB1 or LED201 (Red) of PCB4 are ON in order to avoid an
electrical shock.
• Do not touch the electrical components of the PCB box directly.
?
N O T E
When handling the PCB’s, take care of components. Do not apply excessive force to them, in order to avoid damaging the motherboard
and failures.
The electrical components of the electrical box are distributed in two levels: upper level and lower level.
Upper level
Lower level
VFD
1
To access to the upper level, remove the electrical
box cover as described in section
electrical box service cover”.
2
To access to the lower level, remove the 2 screws that
fix the upper level plate, gently pull the upper level and
the lower level becomes accessible.