Hitachi RAC-10JH5, Instruction Manual

Page: 15 / 76

– 15 –
H
SI
L
G
N
E
DEHUMIDIFYING OPERATION
Set the desired room temperature with the ROOM
TEMPERATURE setting buttons (the display indicates the
setting).
The range of 20-26°C is recommended as the room
temperature for dehumidifying.
Press the (START/STOP) button. Dehumidifying operation
starts with a beep. Press the button again to stop operation.
As the settings are stored in the memory of the remote controller, you
(START/STOP) button next time.
Press the MODE selector button so that the display
indicates
(DEHUMIDIFY).
The fan speed is set at LOW.
Press
(FAN SPEED) button to select SILENT or LOW fan
speed.
Use the device for dehumidifying when the room temperature is over 16°C.
When it is under 15°C, the dehumidifying function will not work.
only have to press the
Ŗ
Dehumidifying takes place with a target temperature which is slightly lower than the room temperature
setting. (However, target temperature is 16°C for a temperature setting of 16°C.) If the room temperature
becomes lower than the target value, operation stops. If the room temperature becomes higher than the
target value, operation restarts.
Ŗ The preset room temperature may not be reached depending on the number of people present in the
room conditions.
DEHUMIDIFYING FUNCTION
1
2
START
STOP