Hitachi RAC-10JH4, Instruction Manual

Page: 28 / 36

– 28 –
2. CLEANING OF FRONT PANEL AND TOP GRILL
• Remove the front panel and the top grill and wash with clean
water.
Wash it with a soft sponge.
After using neutral detergent, wash thoroughly with clean water.
• When the front panel and the top grill are not removed, wipe it
with a soft dry cloth. Wipe the remote controller thoroughly with
a soft dry cloth.
• Wipe the water thoroughly.
If water remains at indicators or signal receiver of indoor unit, it
causes trouble.
Method of removing the front panel
Be sure to hold the front panel with both hands to detach and
attach it.
Removing the Front Panel Attaching the Front Panel
MAINTENANCE
• When the front panel is fully opened with both hands,
push the right arm to the inside to release it, and
while closing the front panel slightly, put it out forward.
• Move the shafts of the left and right arms into the
steps in the unit and securely insert them into the
holes.
Front Panel
Front Panel
Step
Shaft
Shaft
Shaft
Step
1
Removing and attaching the top grill
Removing Attaching
1
Lift up while pressing the top grill and remove from
tab. (3 places: left, centre and right)
2
Pull forward.
1
Position the “ ” sign away. Slide along the top of
the indoor device and press.
2
Press the top grill down and affix with the hold down
tab.
Tab
Tab