Hitachi Plura VF-PBM-207, Operating Instructions Manual

Page: 13 / 32

Page 13 of 32
BASIC OPERATION
Turning On the Monitor
1. If the Camera Cable VC-90A is not installed, please connect it to the VF CABLE connector on the
rear of the viewfinder. Secure the cable with the supplied cable fixing clamp.
2. Power ON the monitor by pressing the POWER button on the front lower right for 2 seconds or
more.
The monitor has a stand-by or power save mode. When in standby mode, the display is off but
the electronics inside the VF are on. In order to turn monitor on, press the
POWER button.
3. The camera video is automatically displayed. Assure that the camera is outputting video and that
the VF is not in “STILL IMAGE” mode (refer to page 20).
On Screen Menu Language Selection

SETUP -> OSD -> OSD Option -> Language

The menu can be shown on the screen in the
selected language.

Supported Language: English, Spanish,
Portuguese, German, French, Italian