manualshive.com logo in svg

Hitachi NV 75AG, Technical Data And Service Manual

The Hitachi NV 75AG is a powerful tool specially designed for heavy-duty applications. For in-depth understanding, the Technical Data And Service Manual is essential, providing comprehensive instructions and service insights. Download the manual for free from manualshive.com to unlock the full potential of this exceptional product.

Share
Download
background image

--- 18 ---

<Driver blade is not returned
  completely.>

See item "1) Output
section: piston, driver
blade, etc.".

     Air pressure is too high.

Problem

Possible cause

(     : Most-common cause)

Inspection method

Remedy

<Body: Nail feeding is
   incomplete.>

Feeder is worn and the
sliding section is abnormal.
Nail guide face of the nose
or the sliding section of the
feeder is abnormal
(deformed, burrs or
damaged).
Feed spring or feeder spring
is abnormal (damaged,
fatigued or removed).

4) Nails jam.
    (continued)

Open the nail guide and
check the position of the
feeder claw.

Replace the abnormal part.

<Body: Nail guide section>

Nail guide section is
abnormal.

    See item "1) Nail guide
    section".

    Perform idle or actual
    driving to check if the driver
    blade is returned
    completely.

    Nails may be jammed if
    driven at a high pressure
    and high speed.  Check
    pressure and driving speed.

    See item "1) Nail guide
    section".

    See item "1) Output section:
    piston, driver blade, etc.".

    Adjust the air pressure to

5 --- 8.5 kgf/cm

2

 (4.9 --- 8.3

bar, 70 --- 120 psi).

Summary of Contents for NV 75AG














































Reviews:

No comments

Related manuals for NV 75AG

RAMSET T2 Operator'S Safety & Operating Instruction Manual preview
T2
Brand: RAMSET Pages: 16
Makita HR4002 Technical Information preview
HR4002
Brand: Makita Pages: 20
Makita RBC260 Service Information preview
RBC260
Brand: Makita Pages: 12
Makita MAKSTAR BTW250 Series Technical Information preview
MAKSTAR BTW250 Series
Brand: Makita Pages: 8
HANYOUNG NUX TPS Series Instruction Manual preview
TPS Series
Brand: HANYOUNG NUX Pages: 2
BGS technic 9655 Instruction Manual preview
9655
Brand: BGS technic Pages: 9
Mannesmann Demag 60023586 Operating Manual preview
60023586
Brand: Mannesmann Demag Pages: 16
KABI KF720-C1 Operating Manual preview
KF720-C1
Brand: KABI Pages: 6
Gardner Denver FXD - 10" Operating And Service Manual preview
FXD - 10"
Brand: Gardner Denver Pages: 27
Parkside 3041 Operation And Safety Notes preview
3041
Brand: Parkside Pages: 37
Mean Well DR-15-12 Installation Manual preview
DR-15-12
Brand: Mean Well Pages: 5
TDK-Lambda CUS30M Installation Manual preview
CUS30M
Brand: TDK-Lambda Pages: 31
Gallagher PowerPlus B40 Instructions Manual preview
PowerPlus B40
Brand: Gallagher Pages: 76
Hama 088439 Operating Instructions preview
088439
Brand: Hama Pages: 2
EASTMAN BBS32 Instruction Book And Parts List preview
BBS32
Brand: EASTMAN Pages: 16
Parkside PAT 12 A1 Translation Of The Original Instructions preview
PAT 12 A1
Brand: Parkside Pages: 65
e+p C 3002 Instruction Manual preview
C 3002
Brand: e+p Pages: 2
Graco SDL23 Series Instructions Manual preview
SDL23 Series
Brand: Graco Pages: 54

Brands by name

Popular brands

Load more brands