Performing Storage Navigator Operations
4-7
Hitachi Universal Storage Platform V/VM Hitachi Storage Navigator User’s Guide
–
The error code #405 5501 is displayed if you install an emergency key
when the option has already been installed with a temporary key and
the remaining lifetime of the option is more than 30 days.
You cannot install an emergency key under these circumstances.
For details on these error codes, see the
Storage Navigator Messages.
Enabling Options Using a License Key File
You can also enable multiple options in a single procedure, using a license key
file. The license key files are provided by Hitachi Data Systems.
To install Storage Navigator options on the Storage Navigator using the license
key file:
1.
Log into the Storage Navigator and open the License Key window (see
2.
Change to
Modify
mode.
3.
From
Mode
, click
File
.
The
Browse
button becomes available.
4.
Click
Browse
to display the dialog box, and select the license key file (the
file extension is “plk” ) to be used for installing options on the displayed
window.
The selected file name is displayed in the
File Name
text box.
The file name must be up to 200 alphanumeric characters (ASCII codes),
except for some symbols, such as
"
,
\
,
;
,
:
,
,
,
*
,
?
,
<
,
>
,
|
,
/
,. You need to be
careful with the license key file name.
5.
Click
Install
. The time taken for installing depends on the number of
license key codes that you install. For example, if you install 30 key codes,
it takes about three minutes. If you install 1000 key codes, it may take
more than 60 minutes.
6.
Click
Apply
(or Cancel).
The status of the enabled options changes to
Installed
.
If installation fails or an error occurs during the installation, a message
dialog box appears and lists the failed options (see Figure 4-3). To display
the error detail in the dialog box, select the failed option and then click
Detail
.
