Projector parts and functions
English-19
I/O Port (Input / Output)
1.
RJ45
Connect a LAN cable from Ethernet.
2.
MONITOR OUT
(D-sub 15-pin mini
shrink jack)
Connect to a monitor.
Loop thru only for COMPUTER IN.
3.
USB POWER
(USB A type jack)
Connect a USB device. (Support 5V/1.5A
output while the projector Power On.)
4.
COMPUTER IN
(D-sub 15-pin mini
shrink jack)
Connect to a PC.(Support RGB and
component video signal input).
5.
3D SYNC
(5V) (VESA 3-pin)
IN: Connect to a PC, 3D player or
synchronizer.
OUT: Connect to 3D IR glasses receiver
unit.
6.
HDBaseT
(RJ-45 jack)
Connect to HDBaseT source via LAN
cable.
7.
DVI-D
Connect to DVI-D source.
8.
VIDEO
(RCA jack)
Connect to the composite video device.
9.
SERVICE
For service personnel only.
10.
HDMI 1
(Digital audio/video connector)
Connect to HDMI or DVI source.
11.
HDMI 2 / MHL
(Digital audio/video
connector)
Connect to a HDMI or MHL-compatible
device.
12.
RS-232C
(9-pin D-sub socket) (Cross
cable)
IN: Connect your PC or system control
equipment.
OUT: Connects to another projector (same
model).
13.
BNC
Connect to BNC inputs for RGB (R/B/G/
H/V) or component (YPbPr) source.
14.
AUDIO IN (L/R)
(RCA jack)
Connect an audio source. (Available for
Video signal input.)
15.
AUDIO OUT (L/R)
(RCA jack)
Connector to an audio amplifier device.
16.
AUDIO IN
(3.5 mm, mini jack)
Connect an audio source input. (Available
for Computer, BNC, DVI-D source.)
17.
WIRED REMOTE
(3.5 mm, mini jack)
IN: Usable wired-remote-control with
accessory cable.
OUT: Connect to another projector (same
model) “WIRE REMOTE IN” for
serial control.
18.
12V TRIGGER
(3.5 mm, mini jack)
Outputs 12V (+/- 1.5V) 350 mA for relay
system control.
