background image

6

SAFETY PRECAUTIONS (continued)

CAUTION

ʄ

 Do not place the unit at a dusty place.

It could cause malfunction.

ʄ

 Do not cover or block any ventilation holes on the product.

The unit would overheat, and it could cause fi re or damage the product which may shorten its service life.

 Install the product in accordance with the instructions in this manual.

 Do not place the unit with ventilation side down.

 Do not install the unit on the carpet or bedclothes.

 Do not cover the unit with table cloth etc.

ʄ

 Be sure to ground the earth cable correctly.

 Especially when you use Power Cord adapter, be sure to connect the earth cable to the ground terminal.  Incorrect 

connection would cause fi re or electrical shock.

 For your safety, always make sure to unplug the Power Cord before connect or disconnect the earth cable.

ʄ

 Connection to a Cable Distribution System is to be provided through a galvanic isolator. 

 Failure to do so may cause a fi re.

ʄ

 Follow the Anti-tumble measures in this manual.

 If the unit tumbles over, there is a risk of personal injury and possible death.  Also, it would damage the product 

seriously.

ʄ

 Do not install this product near the medical devices.

 To prevent malfunction of the medical devices, do not use this product and medical devices in the same room.  

ʄ

 Do not place a CRT-based television near the speakers of the LCD Television.

 It could cause the partial discolouration or blurring of the image on a CRT-based television.

Please install it away from the speakers of the unit.

ʄ

 Disconnect all of the external connection cables and detach the anti-tumble measures before 

moving the unit.

 It may cause fi re, electrical shock, or personal injuries.

ʄ

 Connect the power plug securely.

 Improper connection will cause overheating and may result in fi re.

 Do not touch the blades of the plug whilst connecting it to the wall socket.  It could cause electrical shock.

 If the plug is not fi tted for the wall socket, contact your dealer for replacement.

ʄ

 Do not handle the Power Cord with wet hands.

 It could result in electrical shock.

ʄ

 Do not pull the cord when you unplug the Power Cord.

 It may damage the cord and could result in fi re or electrical shock.

 Hold the plug when disconnecting it.

ʄ

 Unplug the Power Cord when you do not intend to use the product for long periods of time.

ʄ

 Handle the batteries properly.

 Improper or incorrect use of the batteries may cause corrosion or battery leakage, which could cause fi re, personal 

injury or damage to property.

 Use only the types of the batteries which are indicated in this manual.

 Do not install new batteries with used ones.

 Install the batteries correctly by following the polarity (+ and -) indications on the battery compartment.

 Do not dispose of the used batteries as domestic waste. Dispose of them in accordance with the local regulations.

Supply connect 

the ground wire.

Summary of Contents for L37X01A































































































Reviews: