22
Information
How to secure the cables.
After connecting all of the cables to the terminals, secure them with the clamps.
When you secure the cables, please be careful not to tighten too much.
CAUTION
Use only the Power Cord provided.
Do not use a power supply voltage other than that indicated (AC220-240V, 50Hz). It may cause fi re or electric shock.
For the LCD television, a three-core power cord with a ground terminal is used for effi ciency protection. Always be sure
to connect the Power Cord to a grounded outlet and make sure that the cord is properly grounded. If you use a power
source converter plug, use an outlet with a ground terminal and screw down the ground line.
Connection to a Cable Distribution System is to be provided through a galvanic isolator.
Ensure that both ends of power cord are easily accessible.
If you have to change the power cord, please use the certifi ed power cord that meets your region’s safety standard.
CONNECTION (continued)
Connecting Procedure (continued)
4. Connecting the plug into the wall socket
Connect the Power Cord after completing all other connections.
(The type of plug is different from this drawing for some countries.)
UK only
Except UK
Clamp
How to secure the clamp:
To set
To unfasten
Knob
Push the clump in the
direction of the arrow until
it clicks.
Whilst pushing the knob,
pull it in the direction of the
arrow.
