Troubleshooting
Before consulting service personnel, check the following chart for a possible cause of problem
and for a possible solution.
Audio noise
n
Move any infrared equipment away from the TV.
Press the eject button again.
Make sure the Disc move out from the slot.
TV will not turn on
n
Make sure the power cord is plugged in.
o
The batteries in the remote control may be exhausted.
p
Replace new and same brand batteries.
No picture, no sound
n
Check the interface cable between TV and antenna / cable TV.
o
Press the
STANDBY
button on the remote.
p
Press the
INPUT
button repeatedly on the remote to select the
connected video sources.
Picture OK, poor sound
n
Sound may be muted. Press the MUTE button on the remote.
o
n
o
n
o
Press the
VOL.+
button to increase the volume.
Poor picture, sound OK
n
Check the interface cable between TV and antenna / cable TV.
o
Try another channel, the station may have broadcast difficulties.
p
Adjust the Brightness / Contrast options in the Picture Menu.
Disc error Display on screen
35
Introducing
the
LCD
TV
Specifications
Troubleshooting
Using
the
Features
Installing
the
LCD
TV
Preparation
Using
the TV
Features
Using
the DVD
Features
DVD Does not work.
Try to change to other mode, and then change back to DVD mode.
Try to switch off the main switch, and turn it back on after one minute.
DVD will not read the disc
n
Check if the disc is turned over.
o
Check if there is any oil sludge on the disc.
p
Check if there is any obvious vestige on the disc
q
Try to play the disc on other DVD to check whether it is has contents
DVD does not have the signal
n
Check whether it is in DVD source signal.
DVD Troubleshooting
Summary of Contents for L19D01CB
Page 2: ......
Page 44: ...HDE9AC03012 3B ...
