Hitachi L19D01CB, Instruction Manual

Page: 23 / 44

Using Conditional Access Module (CAM)
The Conditional Acc
A conditional access module (CAM) is an electronic device, usually incorporating a slot for a smart card, which
equips a DVB television or set-top box with the appropriate hardware facility to view conditional access content that
has been encrypted using a conditional access system. They are normally used with direct broadcast satellite
services, although the UK digital terrestrial pay TV supplier Top Up TV also uses CAMs.
The module can be inserted into the Common Interface (CI) slot located at the backside (facing downwards)
of the TV.
ess Module (CAM) menu provides access to functions contained on the CAM.
Note
This Conditional access module (CAM) does not come with the TV set. It can only be obtained when you subscribe
to service providers like Pay TV or other service providers.
IMPORTANT
Always switch the TV off before inserting or removing the module.
Inserting the CAM
1. Switch off the TV.
2. Some modules come with a viewing card. When using this type of module, first insert the viewing card into the
module. Ensure that the arrow on the viewing card faces the arrow of the module before inserting into the
module slot.
3 . Insert the module into the Common Interface (CI) slot on the
4 . Switch on the TV.
TV at the rear panel.
5 .
Press the MENU key to display the OSD menu.
6 .
Use the
Ÿ / ź
key to
highlight “
Setup ” menu
and p
ress the
OK
key.
7 .
Press the
Ÿ
/
ź
/
Ÿ
/
ź
key to enter into the “ Cl information” menu and
8 .
Press
OK
key as indicated on the screen to access the CAM’s functions.
IMPORTANT
If no module is inserted, the Conditioanl Access
Module menu will display "Scrambled Program".
If the module is not inserted properly, a warning
message will show on the screen to remind the
users. If you have inserted a module, please
ensure it is fully inserted in the correct manner
as mentioned in Step 2 above. The functions that
now appear on screen are dependent on the
contents of the selected Conditional Access
Module in your country. Refer to the instruction
supplied with the module or contact the vendor.
Module
Connectors at rear of
TV(facing downward)
Common interface
ANTENNA
HDMI 1 HDMI 2
p
ress the
OK
key
(CAM)
21
Introducing
the
LCD
TV
Specifications
Troubleshooting
Using
the
Features
Installing
the
LCD
TV
Preparation
Using
the TV
Features
Using
the DVD
Features