Hitachi HVM Navigator V03-06, User Manual, Page: 220 / 312

4-10 Other functions and settings
HVM Navigator User's Guide - Migration
Changing setting of CPU, memory and service ratio on destination
The function which changes the settings of CPU, memory, service ratio and so
on automatically isn't supported on the destination HVM. To change the
settings, there are the following two ways.
•
Change the above settings on the source HVM and then execute LPAR
migration.
•
Execute LPAR migration in Shutdown with unchecking Activate Destination
LPAR check box and then change the above settings on the destination
HVM.
When you change the above settings in the latter way, operate HVM Navigator
according to the following procedure.
1.
In Migration [Shutdown] window or Add Migration window, uncheck
Activate Destination LPAR check box in migration option group box in
Migration Setting group box.
2. Execute LPAR migration in Shutdown mode.
3. Ensure normal completion of the execution of migration.
4. Change the above settings on the destination HVM.
5. Activate the migrated LPARs on the destination HVM.
When memory size assigned to an LPAR is bigger than memory size available
on the destination HVM, you cannot have the LPAR migrate to the destination
HVM. In this case, change the above settings on the source HVM and then
have the LPAR migrate to the destination HVM.