manualshive.com logo in svg

Hitachi HUS VM, User And Reference Manual

Share
Download
Hitachi HUS VM User And Reference Manual Download Page 26

Route

Command

Specification

Provisioning

User authentication is required. For virtual command

devices, user authentication mode is always enabled.

User authentication mode

You must enable the user authentication mode on the CCI command device.

For the virtual command device the user authentication mode is always

enabled.

When user authentication mode is enabled, use the user ID and password

that you created using Device Manager - Storage Navigator or the

maintenance utility to log in to the storage system.

LDEV nickname function

You can assign a unique nickname of up to 32 characters to an LDEV.

LDEV grouping function

In CCI versions prior to the Hitachi Virtual Storage Platform, you needed to

define the copy groups in the CCI configuration definition file on each host.

When the copy group information changed, the configuration definition file

needed to be edited on each host. In CCI versions after the VSP, the

information registered in the storage system can be used. This LDEV grouping

function can minimize the description of the CCI configuration definition file

on each host. When the copy group information changes, you need to update

only one configuration definition file, saving time and eliminating the chance

for error due to mismatching edits.

The LDEV grouping functionality is implemented using device names, device

groups, and copy groups:

•

Device name:

¢

A name that can be assigned to one LDEV per device group.

¢

Each name is associated with a device group to which the LDEV

belongs.

¢

An LDEV nickname can be assigned to the LDEV as a unique name for

the LDEV that is not related with a device group. Only one LDEV

nickname can be assigned to each LDEV.

•

Device group:

¢

A group of one or more LDEVs. One LDEV can belong to multiple

device groups.

¢

A device group can belong to only one copy group.

¢

If you want to construct a mirror or cascade, you need to define a

different device group and a device name in each copy group.

1-8

Overview

Command Control Interface User and Reference Guide

Summary of Contents for HUS VM



















































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands