manualshive.com logo in svg

Hitachi HUS VM, User And Reference Manual

Share
Download
Hitachi HUS VM User And Reference Manual Download Page 249

Figure 6-9 TrueCopy Async consistency groups

Restrictions

•

Group definition of TrueCopy Async/Universal Replicator/TrueCopy/global-

active device volume: All volumes in a group must be contained within

the same storage system. If two or more groups of CCI include the same

consistency group (CTG ID), then pair operation of the group specification

is handled in consistency group entirety.

•

Registration of CTG ID number and limitations: CCI registers CTG ID to

RAID disk array automatically when paired volumes are created by

paircreate

 command, and groups of configuration definition files are

mapped to CTG ID. The maximum number of consistency groups is as

follows:

¢

HUS VM, VSP, USP V/VM, and Universal Storage Platform/TagmaStore

NSC: 256 (CTG ID 0 - CTG ID 255)

¢

VSP G800, VSP F800, and 9900V: 128 (CTG ID 0 - CTG ID 127)

¢

VSP G400, G600 and VSP F400, F600: 64 (CTG ID 0 - CTG ID 63)

¢

VSP G200: 16 (CTG ID 0 - CTG ID 15)

TrueCopy Async/Universal Replicator/global-active device pair command

is terminated with EX_ENOCTG when the maximum number of

consistency groups is exceeded.

•

Relationships between CTG ID and Journal ID:

 The consistency

group numbers from 0 to 127 are assigned to TrueCopy Async and

Data replication operations with CCI

6-25

Command Control Interface User and Reference Guide

Summary of Contents for HUS VM



















































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands