Hitachi G1000 User Manual Download Page 200

Page: 200 / 246

pairdisplay -g oraHA -fxce -IH0

Group PairVol(L/R) (Port#,TID, LU),Seq#,LDEV#.P/S,Status,

Fence, %,P-LDEV# M CTG JID AP EM E-Seq# E-LDEV# R/W

oraHA dev1(L) (CL1-A-0, 0, 0)311111 2222.P-VOL PAIR

NEVER , 100 4444 - - 0 - - - - L/M

oraHA dev1(R) (CL1-C-0, 0, 0)322222 4444.S-VOL PAIR

NEVER , 100 2222 - - 0 - - - - L/M
pairdisplay -g oraHA -fxce -IH1

Group PairVol(L/R) (Port#,TID, LU),Seq#,LDEV#.P/S,Status,

Fence, %,P-LDEV# M CTG JID AP EM E-Seq# E-LDEV# R/W

oraHA dev1(L) (CL1-C-0, 0, 0)322222 4444.S-VOL PAIR

NEVER , 100 2222 - - 0 - - - - L/M

oraHA dev1(R) (CL1-A-0, 0, 0)311111 2222.P-VOL PAIR

NEVER , 100 4444 - - 0 - - - - L/M

Using the alternate path software, resume I/O to the S-VOL.

If necessary, reverse the P-VOL and the S-VOL.

Related topics

•

I/O modes on page 1-12

•

Reversing the P-VOL and S-VOL on page 6-51

Recovering the storage systems from a primary site failure

(external system at primary site)

If a failure occurs at the primary site in a configuration with the external

storage system for the quorum disk located at the primary site, the failure

might affect the primary storage system and the external storage system

simultaneously. In this case, the GAD pair is suspended, and access to the

GAD volumes stops.

6-48

Disaster recovery of global-active device

Hitachi Virtual Storage Platform G1000 Global-Active Device User Guide

Summary of Contents for G1000























































































































































































































































Search results

Summary of Contents for G1000

Reviews:

Hitachi G1000, User Manual, Page: 200 / 246

Search results

Summary of Contents for G1000

Reviews: