5 - 11
Disassembly and Reassembly > Disassembly
(12) Lock Unit
1) With the disc insertion block closed, remove
the screw [D].
2) Move the lock slider (c) in the direction of the
arrow to open the disc insertion block.
3) Remove the four screws [B].
Caution during disassembly and reassembly:
Be sure to close the disc insertion block
before tightening the screw on the switch
o
fl
ock unit (d), and make sure that the switch
is attached as shown in the
fi
gure: Screwing
the switch with the disc insertion block open
could damage it.
Fig. 5-3-12
Right side
3) [B]
3) [B]
3) [B]
1) [D]
1) [D]
2)
(d)
(c)
(a)
(b)
[D] M1.7×4 (Black)
[B] M1.7×2.5
(Silver)
(a) Lock unit
(b) R case
(c) Lock slider
(d) Switch of lock unit