4 - 18
4-4-1 Checking fi rmware versions
(1) Version check screen display method
1) Attach the AC adapter/charger to power the DVD video camera/recorder.
2) Set the power switch to the position shown below. Then operate the DVD video camera/recorder
while watching the LCD monitor or view
fi
nder screen:
a) Both disc and card are loaded: “Movie” or “Card Still”
b) Only disc is loaded: “Movie”
c) Only card is loaded: “Card Still”
d) Neither disc nor card is loaded: “Movie”
3) While a disc or card, or both, are loaded, press the DISC NAVIGATION button to display the
thumbnail screen. If neither disc nor card is loaded, this step is not necessary.
4) Display the version check screen (version or information display screen) using the following
button operation:
Simultaneously press the SELECT, REC and
buttons.
(2) Version check screen display clearing method
1) When neither disc nor card is loaded, press the STOP/CANCEL button to restore the normal
screen. When a disc or card is loaded, press the STOP/CANCEL button to restore the thumbnail
screen. To restore the normal screen, press the STOP/CANCEL button again or press the DISC
NAVIGATION button.
(3) Details of information display/version screens
Table 4-4-2 Detail/Version Screens
Troubleshooting > Checking Versions of Firmware and Updating
Fig. 4-4-1 Example of Display on Detail/Version Screens
Version
RETURN
Model
:
DZ-xxxxxx
System
:
x.xx
B
Camera
: x.xx B (xx)
Drive (Main) : xxxx. xx. xx. REV
Drive (Core) : xxxx. xx. xx. REV
10355
Item
Display content
Model
Model name
System
System
fi
rmware version number
Camera
Version number of camera microprocessor
fi
rmware, and number of pixels of CCD image
sensor in parentheses ( )
Drive (Main)
Drive main
fi
rmware version number
Drive (Core)
Drive core
fi
rmware version number