manualshive.com logo in svg

Hitachi DS 14DMR, Technical Data And Service Manual, Page: 3 / 59

Share
Download
Hitachi DS 14DMR Technical Data And Service Manual Download Page 3

Page

CONTENTS

1. PRODUCT NAME ........................................................................................................................... 1

2. MARKETING OBJECTIVE ............................................................................................................. 1

3. APPLICATIONS .............................................................................................................................. 1

4. STANDARD EQUIPMENT .............................................................................................................. 1

5. SELLING POINTS .......................................................................................................................... 2

5-1. Selling Points Descriptions ............................................................................................................. 4

6. SPECIFICATIONS .......................................................................................................................... 6

6-1. Specifications .................................................................................................................................. 6

6-2. Optional Accessories .................................................................................................................... 10

7. COMPARISONS WITH SIMILAR PRODUCTS ............................................................................ 13

7-1. Specification Comparisons (Cordless Impact Driver) ................................................................... 13

7-2. Specification Comparisons (Cordless Impact Wrench) ................................................................ 14

7-3. Tightening Torque ......................................................................................................................... 15

7-4. Tightening Time ............................................................................................................................ 20

7-5. Number of Screws or Bolts Driven ................................................................................................ 21

8. PRECAUTIONS IN SALES PROMOTION ................................................................................... 22

8-1. Safety Instructions ........................................................................................................................ 22

8-2. Tightening Torque Inspection Prior to Operation .......................................................................... 25

8-3. Tightening Torque Variation .......................................................................................................... 25

8-4. Suggestions and Precautions for the Efficient Use of the Charger ............................................... 26

9. OTHER PRECAUTIONS .............................................................................................................. 27

10. REPAIR GUIDE .......................................................................................................................... 28

10-1. Precautions in Disassembly and Reassembly ............................................................................ 28

10-2. Precautions in Disassembly and Reassembly of Battery Charger ............................................. 37

11. STANDARD REPAIR TIME (UNIT) SCHEDULES...................................................................... 38

For Models WH 14DMR/WH 18DMR ................................................................................................... 38

For Models WR 14DMR/WR 18DMR ................................................................................................... 39

Assembly Diagram for WH 14DMR

Assembly Diagram for WH 18DMR

Assembly Diagram for WR 14DMR

Assembly Diagram for WR 18DMR

Summary of Contents for DS 14DMR




























































Reviews:

No comments