manualshive.com logo in svg

Hitachi DS 14DMR, Technical Data And Service Manual, Page: 10 / 59

Share
Download
Hitachi DS 14DMR Technical Data And Service Manual Download Page 10

--- 7 ---

Charger
(Model UC 18YG)

Overcharge prevention circuit:
A thermostat monitors the surface temperature of the battery and, on detecting the
temperature rise which occurs on completion of charging, automatically turns off
the unit to prevent the battery from overcharge.
Input capacity: 70 W
Indication method: Pilot lamp indicator of battery charging
Function :  On .......................  During charging

          Off .......................  Charging completed

*

1

: In the case of tapping screws and wood screws, a minimum of M3 (1/8") is possible.

*

2

: This torque is based on tightening an M12 (9/16") bolt (strength grade: 12.9) for 3 seconds with a hexagonal socket.

*

3

: This torque is based on tightening an M16 (5/8") bolt (F10T) for 3 seconds with a hexagonal socket.

*

4

: Main body does not include accessory tools and hook (hexagonal bit etc.).

Prior to charging

During charging

Charging completed

Charging not possible

High battery
temperature

Blinks

Lit

Blinks

Flickers

Lit

0.5 sec ON, 0.5 sec OFF

Stays ON constantly

0.5 sec ON, 0.5 sec OFF

0.1 sec ON, 0.1 sec OFF

Stays ON constantly

Pilot lamp indications (Model UC 14YFA)

Red pilot lamp
remains lit or flashes.

Green pilot lamp is lit.

Storage battery or charger
is faulty.

Charging not possible
because storage battery
temperature is too high.

Summary of Contents for DS 14DMR




























































Reviews:

No comments