Hitachi DH 30PB, Technical And Service Manual

Page: 7 / 13

* ALTERNATIVE PARTS
--- 6 ---
ITEM
NO.
CODE NO. DESCRIPTION REMARKS
NO.
USED
OPTIONAL ACCESSORIES
5 -- 02
DH 30PC
Printed in Japan
(020530N)
632 982-673 CORE BIT (A) 29MM 1
633 982-674 CORE BIT (A) 32MM 1
634 982-675 CORE BIT (A) 35MM 1
635 982-676 CORE BIT (A) 38MM 1
636 982-677 CORE BIT (B) 45MM 1
637 982-678 CORE BIT (B) 50MM 1
638 982-679 CORE BIT (B) 65MM 1
639 982-680 CORE BIT (B) 80MM 1
640 982-681 CORE BIT (B) 90MM 1
641 982-684
CENTER PIN (A) 109L FOR CORE BIT D32-38
1
642 982-685
CENTER PIN (B) 104L FOR CORE BIT D45-90
1
643 303-625
CORE BIT SHANK (SDS PLUS) 25-38MM 105L
1
644 303-626
CORE BIT SHANK (SDS PLUS) 25-38MM 300L
1
645 303-627
CORE BIT SHANK (SDS PLUS) 45-90MM 300
L 1
646 315-921 ADAPTER (A) FOR HAMMER DRILL 1
647 320-859 SYRINGE (BLOW-OUT BULB TYPE) 1
648 303-046
BULL POINT (SDS+) 250MM (ROUND SHANK TYPE)
1
649 303-044
CHEMICAL ANCHOR ADAPTER (SDS+)12.7MMX90L
1
650 303-045
CHEMICAL ANCHOR ADAPTER (SDS+)19.0MMX100L
1
651 950-275 DRILL CHUCK 13VLR 1 INCLUD.652,654
652 930-515 CHUCK WRENCH 10G 1
653 950-272 DRILL CHUCK 13VLA 1 INCLUD.652
654 981-122 SPECIAL SCREW M6X22 1
655 986-802 DUST COLLECTOR ASS’Y 1 INCLUD.656-662
656 986-803 DUST COVER 1
657 986-804 SEAL COVER 1
658 948-310 RETAINING RING FOR D30 SHAFT 1
659 958-063 WASHER 1
660 959-150 STEEL BALL D6.35 (10 PCS.) 19
661 986-805 OUTER RACE 1
662 986-806 SOCKET 1
663 303-820
DRILL CHUCK AND ADAPTER SET (SDS PLUS)
1 INCLUD.651,654,665
664 303-624 CHUCK ADAPTER (D) (SDS PLUS) 1
665 303-623 CHUCK ADAPTER (G) (SDS PLUS) 1
666 971-511Z + DRIVER BIT (A) NO.2 25L 1
667 971-512Z + DRIVER BIT (A) NO.3 25L 1
668 980-927
GREASE FOR HAMMER.HAMMER DRILL (500G)
1
669 308-471
GREASE FOR HAMMER.HAMMER DRILL (70G)
1
670 981-840
GREASE (A) FOR HAMMER.HAMMER DRILL (30G)
1
671 990-912
DUST COLLECTOR (FOR IMPACT DRILL C)
1
672 963-558 ADAPTER 1