background image

[NEW FEATURES] 

New pure fire engine (CS 33EDTP)

 

Anti-vibration springs in handle for low vibration 

Lightweight at only 3.4 kg 

 

We have released the new Models CS 33EDT and CS 33EDTP—top handle chain saws featuring a built-in 

engine compliant with second stage emission regulations, a lightweight body, and a low-vibration handle.     

With these models in hand, we expect you to expand the sales of Hitachi power tools. 

   
 
LIST Nos.   
CS 33EDT:  E098  
CS 33EDTP: E099 
Nov. 2011

 

PRODUCT NAME 

Hitachi Engine Chain Saw 

Models  

CS 33EDT

 

CS 33EDTP

 

MARKETING OBJECTIVE   

APPLICATIONS 

SELLING POINTS 

International Sales Division 

SPECIFICATIONS AND PARTS ARE SUBJECT TO 
CHANGE FOR IMPROVEMENT.

 

Sawing various types of lumber   

Examples of application: 

• Forestry: Lumbering and cutting off tree branches 

• Gardening: Cutting off tree branches, pruning and trimming   

• Home use: Cutting firewood, rough cutting in do-it-yourself carpentry 

• Leisure: Cutting firewood at campsites 

• Farm: Cutting firewood, preparing lumber for cultivating mushrooms, and cutting off tree branches 

• Carpentry: Rough cutting or cast-away cutting of pillars, back slitting, cutting used lumber and timber 

• Civil engineering and construction: Cutting posts to equal lengths, cutting used lumber and timber 

• Other: Rough cutting for large wood carvings 

C

 

Summary of Contents for CS 33EDT































Reviews: