--- 28 ---
Fig. 21
(5) Others
* Caution when remounting the Armature
[57]
to the Housing
[62]
The Armature
[57]
may come off the Ball Bearing 6001VVCMPS2L
[56]
when removing the Armature
[57]
from the Housing
[62]
. To prevent it, press-fit the Armature
[57]
to the Ball Bearing 6001VVCMPS2L
[56]
again
before remounting to the Housing
[62]
(Fig. 10).
* Be careful of the mounting direction of the Cord Clip
[77]
. (Fig. 22)
Fig. 22
Cord dia.: More than 8.5 mm,
10.8 mm or less
Cord dia.: More than 6.4 mm,
8.5 mm or less
[77]
[76]
10-2. Lubrication
Attolub MS-No. 2
Outer circumference of Plunger (C)
[27]
Groove of Plunger (C)
[27]
Inner circumference of Metal (C)
[24]
Inner circumference of Guide Sleeve (C) Ass'y
[25]
Teeth of the Gear
[50]
Pinion of the Armature
[57]
5.7-mm diameter hole of Counter Weight (D)
[29]
Apply 30 g of grease to Gear Cover (D)
[20]
(Gear
[50]
, Swing Roller
[37]
and inner
circumference of Guide Sleeve (C) Ass'y
[25]
)
Slanted portion of Lever (C)
[35]
Inner circumference of the Swing Roller
[37]
Spherical portion of Recipro Plate (C)
[44]
Spherical portion of Recipro Plate (D)
[48]
Weight Shaft (D)
[30]
Groove of Counter Weight (D)
[29]
[47]
[14][15]
[49]
[30]
[28]
