Hitachi CPX4 - CP X4 XGA LCD Projector Page 1 User Manual Download

Page: 1 / 121

Projector

CPX4

User's Manual (detailed)

Network Guide

Thank you for purchasing this projector.

This projector has the network function that brings you the following main features.

►Before using this product, be sure to read all manuals for this

product. After reading them, store them in a safe place for future reference.

WARNING

• The information in this manual is subject to change without notice.

• The manufacturer assumes no responsibility for any errors that may appear in

this manual.

• The reproduction, transfer or copy of all or any part of this document is not

permitted without express written consent.

NOTE

Trademark acknowledgment

Live Mode

This projector can project your PC images on screen through wireless or wired

network, which can erase a signal cable from your desk.

Quick connection to your network

No expert knowledge is required any more. Various options for network setting

give you a quick and simple connection to the network.

Web control

The projector can be controlled and monitored by a web browser software on

your PC, which can help you to setup and maintain the projector.

PC-LESS Presentation

This projector can project images stored in an SD memory or a USB memory

on screen, which allow you not to bring your PC with you.

SD CARD

This manual is only intended to explain Network functions only.

For safety, operations or any other issues, refer to the Safety Guide and User’s

Manual (concise and detailed).

• Internet Explorer

and Windows

, Windows Vista

are registered trademarks of

Microsoft Corporation in the U.S. and/or other countries.

• Pentium

is a registered trademarks of Intel Corp.

• JavaScript

is a registered trademark of Sun Microsystems, Inc.

All other trademarks are the properties of their respective owners.

Summary of Contents for CPX4 - CP X4 XGA LCD Projector


























































































































Search results

Summary of Contents for CPX4 - CP X4 XGA LCD Projector

Reviews:

Related manuals for CPX4 - CP X4 XGA LCD Projector

Brands by name

Popular brands

Hitachi CPX4 - CP X4 XGA LCD Projector, User Manual

Search results

Summary of Contents for CPX4 - CP X4 XGA LCD Projector

Reviews:

Related manuals for CPX4 - CP X4 XGA LCD Projector

Brands by name

Popular brands