Hitachi CP-X2011N Page 148 Operating Manual Download

Page: 148 / 253

2.1.2 Displaying the status

1) Indicator

The indicator shows the following status.

2) Status Display in Multi PC mode

The icon is displayed at the right end of the Display mode buttons.
One of the following icons to inform which quarter screens are used will be

shown.

• The status display is refreshed in every 3 seconds.

• If the status cannot be gotten from the projector, it will not be displayed.

NOTE

Indicator

Status

Note

Not connected

The network connection to the projector is
not established yet.

Hold

The network connection is established, but
the image transmissions on hold.

Connected

The network connection is established and
the images on the computer are being sent
to the projector.

Disconnected

The network connection to the projector is
disconnected.

Status

Status icon

No computer is on screen

One computer is on screen.

Two computers are on screen.

Three computers are on screen.

Four computers are on screen.

2. Network Presentation

2.1 Using the “LiveViewer” (continued)

Summary of Contents for CP-X2011N






























































































































































































































































Search results

Summary of Contents for CP-X2011N

Reviews:

Related manuals for CP-X2011N

Brands by name

Popular brands

Hitachi CP-X2011N, Operating Manual

Search results

Summary of Contents for CP-X2011N

Reviews:

Related manuals for CP-X2011N

Brands by name

Popular brands