33
1.9 Profile data
The network setting to connect the projector and computer can be stored as a
pro
le data. Once the data is stored, all you need to do is to select the data to
connect to the network. It is recommended when the same network connection is
often used.
1.9.1 Outline of Profile data
The pro
le data is made on the Manual
Con
guration screen. (
23
)
Up to 10 pro
le data can be stored for each
network adapter.
1) Select
the
[Pro
le]
and click the
[New]
.
2) The “Create new pro
le” will come up.
If you have already made 10 pro
le data,
you cannot make a new one, until you delete
a stored data.
Input all information required for your
network connection.
If you want to clear the information you input,
click the
[Clear]
.
1.9.2 Making Profile data
3) Click
the
[OK]
, after all information is set.
If you don’t want to store it, click
the
[Cancel]
.
4) The new pro
le data is shown in the pro
le list, if you click
the
[OK]
.
• When you make a new pro
le data, it is strongly recommended to
check that the new dada can work properly by selecting the data at the Pro
le
connection. (
23
)
• If you change a wireless network adapter on your computer, make a new
pro
le data for the adapter.
NOTE
1. Connection to the network
