Hitachi CP-X2011N Operating Manual Download Page 125

Page: 125 / 253

1) Turn on the projector, and make sure that the projector image is on screen.

2) Press the

MENU

button on the remote control or the

▲

▼

◄

►

buttons on

the projector to show the menu on screen.

3) Use the

▲

▼

cursor buttons to select the Go to Advanced Menu..., and use

the

►

cursor button to enter the item.

4) Use the

▲

▼

cursor buttons to select the NETWORK, and use the

►

cursor

button to enter the item.

5) Use the

▲

▼

cursor buttons to select the INFORMATION, and use the

►

cursor button to display the INFORMATION.

6) The Passcode appears in the INFORMATION window.

Method 2

• Take the method 2 when you project your computer image by the

“LiveViewer”, or when the

LAN

port is not selected as input source.

• If no communication between the projector and computer in 5 minutes, the
Passcode will be changed.

NOTE

1. Connection to the network

1.5 Selecting the network connection method (continued)

Summary of Contents for CP-X2011N






























































































































































































































































Search results

Summary of Contents for CP-X2011N

Reviews:

Hitachi CP-X2011N, Operating Manual, Page: 125 / 253

Search results

Summary of Contents for CP-X2011N

Reviews: