6
1.2 Installing the “LiveViewer”
The “LiveViewer” software needs to be installed on all the computers to connect
to the projector through a network.
If your OS is Windows XP or Vista, you need to log in as an administrator user to
install the software.
1) Turn on the computer.
2) Shut down all applications.
3) Insert the accompanying CD-ROM into the computer's CD-ROM drive.
• If the Choose Setup Language dialog doesn't appear, proceed as follows:
(1) Click on the
[Start]
button on the toolbar and select the “Run”.
(2) Enter E
:\software\setup.exe and then press the
[OK]
.
NOTE
If your CD-ROM drive is not drive E on your computer, you will need to
replace E with the correct drive letter assigned to your CD-ROM drive.
If the software has been already installed, Uninstallation will be done. Click
the
[Cancel]
button, then uninstallation will be canceled. If you uninstalled the
software by miss-operation, please re-install the software from
rst procedure.
5) After a moment, the Welcome dialog will appear
as shown on the right. Press the
[Next]
.
• After sequence 3), the User Account Control (UAC) dialog will appear (if
you are using Windows Vista). Please click the
[Allow]
to continue installation.
NOTE
4) After a moment, the Choose Setup Language
dialog will appear as shown on the right. Select
what you like to use in the list, and click the
[OK]
.
1. Connection to the network
1.2.1 Installing the “LiveViewer”
