background image

Warning

4

If any abnormality occurs.

·

When there is an abnormal smell or smoke, if

you use this unit as it is, this could cause a

fire or electric shock, etc. When an

abnormality is found, immediately turn off the

power switch and pull out the power plug

from the power outlet. Check that there is no

smoke, etc., then contact your dealer to repair

the unit. Do not repair it yourself as it is very

dangerous.

·

Do not use this unit as it

is after trouble has

occurred, such as "No

picture", "No sound", "Abnormal

sound", etc.  This may cause a fire,

electric shock, etc. In this case

immediately turn off the power

switch and disconnect the power plug, then

contact your dealer to repair the unit.

·

If water, etc. enters inside the unit, turn off the

power switch of the unit first and disconnect

the power plug and then contact your dealer.

If you use it as it is, it may cause a fire,

electric shock, etc.

Do not insert any foreign object

.

·

Do not insert a metal or flammable

object inside through the ventilation

holes, etc. This may cause a fire,

electric shock, etc.

·

If foreign matter enters inside, turn

the power switch off and disconnect

the power plug from the power

outlet and contact your dealer. If

you use as it is, it may cause a fire,

electric shock, etc. Be careful

especially if children could touch the unit.

Pull out the
power plug 
from the 
power
outlet.

Do not put a container, etc. with 

liquid on this unit.

Do not put a vase, flowerpot,

cosmetic container, medicine or

water and small metal objects on this unit.  If

liquid spills and enter inside the unit, it may

cause a fire, electric shock, etc.

Do not apply any shock.

If you drop this unit or if the cabinet

is broken, turn off the power switch,

disconnect the power plug and

contact your dealer.  If you use it as

it is, it may cause a fire, electric

shock, etc.

(Safety precaution)

Do not install this unit in an unstable  place.

Avoid placing it in an unstable place

such as weak base, inclined floor, etc.

This may cause it to drop or fall over,

resulting in injury.

Do not open the cabinet.

Do not open the cabinet.

There are high voltage

parts inside the cabinet

and this may cause an

electric shock.  Ask your

dealer to check inside and adjust and

repair the unit.

Do not remodel this unit.

Do not remodel this unit.  It may

cause a fire, electric shock, etc.

Do not use this in a bathroom, etc.

Do not use this unit in a bathroom,

etc. This may cause a fire, electric

shock, etc.

Do not use 
near water

Do not look directly at the lens when 

the lamp is lit.

Do not look directly at the lens when

the lamp is lit.  Since a strong light

is used, it could damage you vision, etc.

Especially pay attention if children are present.

Do not use power supplies other 

than that specified.

Do not use this unit with a power

voltage other than specified power

supply voltage.  It may cause a fire, electric

shock, etc.

Prohibition
of
disassembly

Electric shock
hazard

Pull out the
power plug 
from the 
power
outlet.

Pull out the
power plug 
from the 
power
outlet.

Prohibition
of
disassembly

Summary of Contents for CP-S830E
































Reviews: