manualshive.com logo in svg

Hitachi Copy-on Write SnapShot, User Manual, Page: 7 / 90

Share
Download
Hitachi Copy-on Write SnapShot User Manual Download Page 7

Preface

vii

Hitachi Simple Modular Storage Copy-on-Write SnapShot User’s Guide

Getting Help

If you have questions after reading this guide, contact an Hitachi Data 

Systems authorized service provider[H1] or visit the Hitachi Data Systems 

support website, http://support.hds.com.

Support Contact Information

If you purchased this product from an authorized Hitachi Data Systems 

reseller, contact that reseller for support. For the name of your nearest 

Hitachi Data Systems authorized reseller, refer to the Hitachi Data Systems 

support web site for locations and contact information.

To contact the Hitachi Data Systems Support Center, please visit the Hitachi 

Data Systems website for current telephone numbers and other contact 

information. 

http://support.hds.com

Please provide at least the following information about the problem:
• Product name, model number, part number (if applicable) and serial 

number

• System configuration, including names of optional features installed, 

host connections, and storage configuration such as RAID groups and 

LUNs

• Operating system name and revision or service pack number
• The exact content of any error message(s) displayed on the host 

system(s)

• The circumstances surrounding the error or failure 
• A detailed description of the problem and what has been done to try to 

solve it

• Confirmation that the Hitachi Data Systems Hi-Track remote monitoring 

feature has been installed and tested.

Comments

Your comments and suggestions to improve this document are greatly 

appreciated. When contacting HDS, please include the document title, 

number, and revision. Please refer to specific section(s) and paragraph(s) 

whenever possible.
•  E-mail: 

[email protected]

•  Fax:     858-695-1186
•  Mail:    Technical Writing, M/S 35-10

 

     Hitachi 

Data 

Systems 

 

     10277 

Scripps 

Ranch 

Blvd.

 

     San 

Diego, 

CA 

92131

Thank you!

 (All comments become the property of Hitachi Data Systems 

Corporation.)

Summary of Contents for Copy-on Write SnapShot



























































































Reviews:

No comments