manualshive.com logo in svg

Hitachi Copy-on Write SnapShot, User Manual, Page: 36 / 90

Share
Download
Hitachi Copy-on Write SnapShot User Manual Download Page 36

4–2

Enabling and Disabling SnapShot

Hitachi Simple Modular Storage Copy-on-Write SnapShot User’s Guide

Enabling/Disabling SnapShot

To enable/disable SnapShot 

1. In the Navigator 2 GUI, select the array where you want to enable 

SnapShot and click the 

Show & Configure Array

 button.

2. In the tree view, click 

Settings

, then click 

Licenses

.

3. Select 

SnapShot

 in the Licenses list, then click the 

Change Status

 

button at the bottom of the page. 
The Change License screen appears. 

•

4. To enable, click the 

Enable: Yes

 check box.

To disable, clear the 

Enable: Yes

 check box. 

•

5. Click 

OK

. 

•
•

6. In the confirmation screen that appears for the enabling and disabling 

actions, click 

OK

. The Reboot Array message appears confirming the 

operation is complete. Before beginning the restart process, make sure 

that the host has stopped accessing data.

NOTE:

When disabling, SnapShot pairs must be deleted.

Summary of Contents for Copy-on Write SnapShot



























































































Reviews:

No comments