Hitachi Compute Blade 2500, Getting Started Manual

Page: 92 / 154

Available functionality Menu Command
2
.
When the remote console is displayed in full screen mode, the keyboard pass-
through mode is always enabled.
3
.
If the appropriate mouse mode is not specified, the mouse does not function
correctly.
4
.
Use the Web console to control the power supply of server blades that are running in
LP mode. You cannot use a remote console to control the power supply.
Creating a disk image for access from the server blade
To install an operating system or applications stored on CD/DVD media on a
server blade without a CD/DVD drive, you can use either of the following
methods.
• Connect the server blade remotely to the CD/DVD drive of the system
console.
• Create a virtual disk image of the CD or DVD media on the system
console, and connect to the console remotely from the server blade.
We recommend creating a virtual disk image. This is because the data can be
read faster from a disk image than from a CD or DVD, and a disk image can
be handled more flexibly. This chapter describes how to create a virtual disk
by using the remote console functionality.
Starting the Virtual Media console
For creating disk images from virtual media, the CB 2500 supports the Virtual
Media console. To start the Virtual Media console, use the Launch Virtual
Media command from the remote console.
1
.
From the Tools menu of the remote console, execute the Launch Virtual
Media command.
Items in the Virtual Media console
This section describes the window and functionality of the Virtual Media
console.
5-10
Functionality and Operation of the Remote Console
Hitachi Compute Blade 2500 Series Getting Started Guide