Hitachi Compute Blade 2000, User Manual

Page: 1789 / 1927

1738
1
3
S
yst
em
O
p
er
at
ion and Man
agem
ent
12 When the screen returns to Properties, click OK .
The procedure above completes the role setting for users to log in to the
management module and BMC.
When typing roles for BMC and the management module
consecutively, divide them with a blank space.
Setting example:
ServerBladeRole=10101010 ManagementModuleRole=Administrator

Registering groups
Register the group to use for group authentication.
If you do not use group authentication, this setting is not
required.
Open Management Tools > Active Directory Users and Computers , create a
group you allow login to server blades and a group you allow login to management
modules in the LDAP directory. After you create the groups, register user accounts
you allow login with each group.
For details about how to create groups and how to register user accounts with
groups, see the documentation of your Windows server.
You can use a single group for logging in to server blades
and management modules.

Windows support tools
Windows Support Tools is a package software program that contains "ADSI (Active
Directory Service Interface) Edit" for operating objects registered with Active
Directory, and "ldp" for performing Active Directory operations through LDAP.
This section describes how to check whether this package software is installed
When Windows Server 2008 or later versions are equipped
with this package, skip this procedure.
Select Control Panel and open Add and Remove Programs . The list of installed
programs is displayed.
When “Windows Support Tools” is displayed in the list, “ADSI Edit” and “ldp” are
available. If not, install “Windows Support Tools” from the install media.