Hitachi Compute Blade 2000, User Manual

Page: 1271 / 1927

1220
12
Log
ical
par
titio
ni
ng man
age
r

System configuration
The following functions are available in the System Configuration screen.

Changes the LP ID, virtual NIC system number or administrative path.

Changes the IP address of LPAR manager or ServerConductor/Blade Server
Manager (BSM).

Configure the TCP port of the virtual COM console.

Change LPAR manager operating modes.
The following table describes each item on this screen.
# Title Official Name Description Initial Value
(1) LP ID LPAR manager
identifier
Sets the ID that identifies LPAR manager
Numbers, in which periods are omitted from the
LPAR manager IP address, are reflected as the
initial value following "LP_".
LP_0000
(2) LP IP Address LPAR manager
IP address
Make sure to set the new LPAR manager IP
address from the default. Otherwise, you cannot
go to another screen.
0.0.0.0
(3) Subnet Mask Subnet mask Make sure to set the new Subnet Mask from the
default. Otherwise, you cannot go to another
screen.
255.255.255.
255
(4) Default
Gateway
Default gateway Sets the IP address of the Default Gateway. 0.0.0.0
(5) BSM1~4 IP
Address
BSM1~4 IP
addresses
Sets the BSM IP addresses.
Sets IP address for a server blade on which
ServerConductor/Blade Server Manager (BSM),
HvmSh command, and HvmGetPerf command
operate.
When LPAR manager is started, the System
Manager 1~4 IP Addresses, which are set to the
management module, are applied as the initial
values.
-
+---------------------------------------------------(14) Error Event Detected --+
|+- System Configuration -----------+-----------------------------------------+|
|| | ||
|| LP ID LP_192168020 (1)| Alert Language Japanese (9) ||
|| | Virtual Console Port 20801 (10) ||
|| LP IP Address 192.168.0.20 (2)| LP Operating Mode Standard(11) ||
|| Subnet Mask 255.255.255.0 (3)| ||
|| Default Gateway 0.0.0.0 (4)| ||
|| | ||
|| BSM1 IP Address 192.168.0.168 (5)| LP CLI1 IP Address 0.0.0.0 (12) ||
|| BSM2 IP Address 0.0.0.0 | LP CLI2 IP Address 0.0.0.0 ||
|| BSM3 IP Address 0.0.0.0 | LP CLI3 IP Address 0.0.0.0 ||
|| BSM4 IP Address 0.0.0.0 | LP CLI4 IP Address 0.0.0.0 ||
|| BSM1 Alert Port 20079 (6)| LP CLI5 IP Address 0.0.0.0 ||
|| BSM2 Alert Port 20079 | LP CLI6 IP Address 0.0.0.0 ||
|| BSM3 Alert Port 20079 | LP CLI7 IP Address 0.0.0.0 ||
|| BSM4 Alert Port 20079 | LP CLI8 IP Address 0.0.0.0 ||
|| | ||
|| Management Path Default (7)| ||
|| VNIC System No: 1 (8)| ||
|+----------------------------------+-----------------------------------------+|
| |
+------------------------------------------------------------------------------+
|(13) F10:Update System Config Esc:Menu |
+------------------------------------------------------------------------------+