background image

5-2 

Installing a driver 

Hitachi Compute Rack Series 

PCI-Express Dual Port 10 Gigabit LAN Card Instruction Manual 

Windows 2008 R2 environment 

 

 

When connecting the LAN cable to the network interface connector, the 
drivers bundled in the Windows 2008 R2 cannot be used.  
When CN7841-Y or CN7841-R LAN card is added, be sure to apply the 

driver in the "Drivers & Utility for Windows" CD. If the driver is 
preinstalled as a factory expanded model, it is not necessary to install. 

Procedure for installing the driver for Windows 2008 R2 

When using this LAN card, install the network driver for the Windows 2008 R2. 
It explains an automatic installation method by a driver. The procedure of 

shown below is Windows 2008 R2.  

1.

 

Log in with the user name having the administration authority (such as 
Administrator). 

2.

 

Click Hardware of Control Panel and then click Device Manager of 
Devices and Printers. In the Device Manager window, double-click 
Ethernet Controller under Other devices

 

3.

 

 The Update Driver Software window opens. Click Browse my 
computer for driver software

 

On the Update Driver Software window, insert the "Drivers & Utility 
for Windows" CD
 into the DVD-ROM drive and enter the directory shown 
below. Then click Next

 

Table 5-1   

OS 

LAN driver storage location 

Windows 2008 R2 

D:\WinSrv2008R2\Drivers\NIC\BROADXG_03\x64\setup.exe 

 

Summary of Contents for CN7841-Y










































Reviews: