Microprocessor-based preset functions can store 26 sets of geometry
settings including the standard settings.
The following industrial standard settings have been preprogrammed by the
factory.
No.
Video Mode Name
Horizontal
(with Resolution and
Frequency
Vertical Frequency)
1
VGA 640 X 480 - 6 0 Hz
31.47
2
VESA 800 X 600 85 Hz
53.67
3
VESA1024 X 768 85 Hz
68.68
4
VESA1280 X 1024 85 Hz
91.15
5
VESA1600 X 1200 75 Hz
93.75
6
VESA1600 X 1200 85 Hz
106.25
Video Model
VGA
VESA
VESA
VESA
VESA
VESA
NOTE :
Input signals with approximately the same frequencies may be regarded as the same signal.
n
The following horizontal timing conditions are recommended (at sync. H, V separate or
composite).
for 31
52
horizontal frequency:
Horizontal front porch should be more than 0.1
Horizontal sync. width should be within 1 .O 3.8
Horizontal back porch should be more than 1.2 ys.
Horizontal blanking width should be more than 3.5
for 52
107
horizontal frequency:
Horizontal front porch should be more than 0.1
Horizontal sync. width should be within 0.8 3.0
Horizontal back porch should be more than 1 us.
Horizontal blanking width should be more than 2.4
n
The following vertical timing conditions are recommended.
Vertical front porch should be more than 9 ys.
Vertical sync. width should be less than 100 us.
Vertical back porch should be more than 400
Vertical blanking width should be more than 450 us.
n
In case the front or back porch is extremely long, or the data display time is extremely short,
it may not be able to set the expected size and position.
Standard settings are subject to change without notice.
This monitor is tested and conformed compliance with
and
3) ergonomics requirement on the following video modes :
“VESA 1024 X 768 85 Hz”
“VESA 1280 X 1024 85 Hz”
8
