Hitachi CB 520A A1 User Manual Download Page 476

Page: 476 / 558

Item

Requirements

Red Hat Enterprise Linux7: 1024MB (1024MB/

LPAR is recommended)

Notes on temporary LP licenses

•

LPAR manager system log messages and HCSM alert messages are output

before and when a temporary LP license expires. For details about the

HCSM alert messages, see the Hitachi Compute Blade 500 Series

Management Module Setup Guide.

•

If the license expires while LPAR manager is operating, the following

operations are suppressed:

Operation to activate LPARs

OS startup after reactivating LPARs

OS startup after restarting OSs

Operations that include the operation to activate LPARs (such as boot

order configuration and boot device acquisition)

•

If the expiration date has already passed when LPAR manager starts, the

server blade will operate as the Essential model.

•

If the license has expired, register a string of 49 characters (beginning

with "0" and followed by the temporary LP license key of 48 characters)

as the LP license key, so that the server blade can be updated to one with

a permanent Essential license.

•

When a temporary Enterprise license is additionally registered for a server

blade with a permanent Advanced license, the permanent Advanced

license is overwritten. Register the permanent Advanced license key again

to return the server blade to the permanent Advanced license.

•

To register a temporary Enterprise license, confirm in advance that a

permanent Advanced license key exists. If registering the permanent LP

license to a server blade with a temporary LP license causes some of the

functions to become unavailable (see

Functional differences depending on

the LPAR manager license on page A-23

) due to downgrading of the

model, the LPAR settings for these functions will be changed to the

default.
Therefore, back up the LPAR manager configuration information before

registering a permanent LP license for a lower model, and then restore

the LPAR manager configuration information after the purchased LP

license is registered.

•

The time setting of the management module and LPAR manager must be

the same. If the time settings do not match, LPAR manager might

recognize an expiration date earlier than the actual expiration date.

10-4

Notes

Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide

Summary of Contents for CB 520A A1















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CB 520A A1

Reviews:

Related manuals for CB 520A A1

Brands by name

Popular brands

Hitachi CB 520A A1, User Manual

Search results

Summary of Contents for CB 520A A1

Reviews:

Related manuals for CB 520A A1

Brands by name

Popular brands