Hitachi CB 520A A1 User Manual Download Page 149

Page: 149 / 558

•

If "Deactivate" operation, "Reactivate" operation or logical server

movement operation is performed to the target LPAR during guest

memory dump, the operation takes precedence and the guest memory

data is not retained. Therefore, guest memory dump can no longer be

continued and the guest memory dump is cancelled. When guest memory

dump is in progress, do not perform "Deactivate" operation, "Reactivate"

operation or logical server movement operation to the target LPAR.

•

LPARs other than the target LPAR continue to work after guest memory

dump is started, but those that use the LPAR manager management NIC

as shared NIC may be affected as its network performance degrades.

•

If Force Recovery is performed on the System Service State screen of the

LPAR manager screen during guest memory dump, the memory dump

operation is cancelled.

•

If Update System Config is performed with the F10 key on the System

Configuration screen of the LPAR manager screen during guest memory

dump, the memory dump operation is cancelled.

•

If the processing to automatically stop all logical Processors of the target

LPAR fails at the beginning of guest memory dump, the memory dump

operation is cancelled and the target LPAR is deactivated forcibly. If this

deactivation fails, the target LPAR is blocked. When this state occurs,

contact the maintenance personnel.

•

If an unrecoverable error occurs during guest memory dump in the LPAR

manager machine that performs guest memory dump, the memory dump

operation is cancelled. When this state occurs, contact the maintenance

personnel.

•

If an LPAR manager Assist error occurs during guest memory dump, the

memory dump operation may be cancelled. When this state occurs,

contact the maintenance personnel.

•

If a communication error occurs in the network between LPAR manager

machine and external FTP server during guest memory dump, the

memory dump operation is cancelled. When this state occurs, check the

network configuration between LPAR manager machine and external FTP

server. If the problem is still not solved, check whether the FTP software

program of the external FTP server is running correctly. If the problem

still remains, contact the reseller from which you purchased this

equipment or consult maintenance personnel.

•

When guest memory dump processing and guest OS dump processing by

the Dump operation on the Front Panel screen are performed

simultaneously to one LPAR, all the logical Processors of the LPAR stop

due to guest memory dump and the guest OS processing stops

accordingly. Therefore, the guest OS dump operation on the Front Panel

screen is disabled, but the guest memory dump is enabled. Remove this

precaution with the following operational procedure:

When you find an abnormal operation of the guest OS and dump the

guest memory data, perform guest OS dump first by the Dump

operation on the Front Panel screen.

If this guest OS dump operation fails, perform the guest memory

dump using the guest memory dump function.

Maintenance Functions

4-5

Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide

Summary of Contents for CB 520A A1















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for CB 520A A1

Reviews:

Related manuals for CB 520A A1

Brands by name

Popular brands

Hitachi CB 520A A1, User Manual

Search results

Summary of Contents for CB 520A A1

Reviews:

Related manuals for CB 520A A1

Brands by name

Popular brands