Hitachi C2844S, Instructions For Use Manual, Page: 15 / 22

ENGLISH - 10 -
Setting Brightness
• As you enter the picture menu, Brightness will be the first
selected option.
• Press “ ” button to increase brightness.
• Press “ ” button to decrease brightness.
%5,*+71(66
&2175$67
&2/285
6+$531(66
02'(
6725(
Setting Contrast
• Using “ “ or “ ” button select Contrast.
• Press “ ” button to increase contrast level.
• Press “ ” button to decrease contrast level.
Setting Colour
• Using “ “ or “ ” button select Colour.
• Press “ ” button to increase colour level.
• Press “ ” button to decrease colour level.
Setting Sharpness
• Using “ “ or “ ” button select Sharpness.
• Press “ ” button to increase peaking level.
• Press “ ” button to decrease peaking level.
Setting Hue
(During Playback NTSC system, this will appear in AV mode
only when NTSC video source is applied. Otherwise, HUE
option is invisible in Picture menu.):
• Using “ “ or “ ” button select Hue.
• Press “ ” button to increase hue level.
• Press “ ” button to decrease hue level.
Center value is indicated with the two reciprocal arrows.
Mode
This item is used to change the picture size. By pressing “ ”
or “ ” button you may choose one of these options: “4:3”,
“16:9” and “AUTO”. It is also possible to change picture modes
directly by pressing button “ ” on your remote control.
• 4:3 This option forces the picture ratio to 4:3 mode.
• 16:9 This option forces the picture ratio to 16:9 mode.
• AUTO This allows to change the picture mode automatically,
according to the transmission of the selected channel. For
example, your TV is 4:3 mode, but the transmission of that
channel is in 16:9 mode. If you select the AUTO mode, the TV
is switched to 16:9 mode automatically. If the TV is in 4:3
mode and the picture ratio of the channel is also 4:3, there will
be no affect selecting the picture mode to AUTO mode.
WSS feature is only used in TV and B-AV modes. For the Pic-
ture Mode selection in AV-1 and AV-2 the pin 8 (of Scart) value
is used. In RGB and SVHS modes the Picture Mode can be 4:3,
16:9 (Auto mode is not available.).
When the menu appears on screen, picture mode will auto-
matically change to its default tube mode (4:3 or 16:9) but it
will turned to its stored mode when the menu disappears.
To Store the Settings
• Press “ ” or “ ” button on STORE option to store Picture
menu settings except Picture Mode.
Feature Menu
• To enter the Feature menu directly, press the “ YELLOW ”
button, or
• Press " " button, now you are in Main menu. In the Main
menu, select FEATURE using “ “ or “ ” button. Then enter
the Feature menu pressing “ ” or “ ” button.
ENG-(C2844S)-2850M-3040-AK37-ST1P-VST-50041887.p65 26.06.2003, 11:04 10