Hitachi AMS 2100, Hardware Manual

Page: 237 / 306

Configuration
7–55
Hitachi AMS 2100/2300 Storage System Hardware Guide
• Every 24 hours after initially starting the array (for every 24 hours from
here on).
If the synchronization status is a failure, check whether the IP address of
the NTP server is correct, and confirm that the network connection between
the array and the NTP server is operational.
Setting functions in the Date & Time window are described below.
Edit Date & Time
Click Edit Date & Time in the Date & Time window. When the Edit Date &
Time window appears, set the date and time of the array clock.
•
When you set the time of the server on which Hitachi Storage Navigator 2
is installed automatically, select Set Automatically. When you enter the date
and time manually, select Set Manually and then enter the values. In case
of Set Manually, the value displayed in the input column by default is same
as the date and time when Edit Date & Time window is displayed.
Edit Time Zone & NTP
Click Edit Time Zone & NTP in the Date & Time window. When the Edit
Time Zone & NTP window appears, set the time zone for the array clock
function or the configure the array to an NTP server.