Hitachi AMS 2000 Series, Reference Manual

Page: 104 / 262

1–86
Performing CCI Operations
Hitachi AMS 2000 Family Command Control Interface (CCI) Reference Guide
Options
(continued) -gvinf: For Windows 2000 and Windows Server 2003 systems only. 
-gvinfex: For Windows Server 2003 GPT disk only. This option obtains the
signature and the volume layout information from the device that is given by
a standard input or by an argument, and saves (shelters) the information
under the system device in the following format (see
Figure 1-77, “Inqraid
Command –gvinf Option Example”, on page 1-91 also). File format:
\WindowsDirectory\VOLssss_llll.ini
(ssss indicates the serial number of the array, and llll indicates the LDEV
number.) Usually, you do not need to be aware of this file, since the file is used
by the Windows’ Disk Management at the beginning when setting the S-VOL
signature and the volume information.
-svinf: For Windows 2000 and Windows Server systems only.

-svinfex: For Windows Server GPT disk only. This option sets the saved
(sheltered) signature and the system volume layout information of the system
device into the device that is given by a standard input or by an argument.
When setting the signature and the volume layout information to the device,
the host issues the SCSI inquiry command, obtains the serial number of the
array and the LDEV number, and then reads the applicable VOLssss_llll.ini file.
Therefore, even if the hard disk number is changed due to changing the
configuration, the signature and the volume layout information will be set
correctly since it is managed by the array serial number and the LDEV number.

For [=PTN], specify a pattern for selecting the character string that is given as
a device by a standard input or by an argument (see
Figure 1-78, “Inqraid
Command -svinf Option Example”, on page 1-91 also).
-fv: This option is used with “$Volume specification”. Volume{guid} of the
appropriate volume is displayed in the wide format.
Example:

# inqraid -CLI $Vol -fv 
DEVICE_FILE PORT SERIAL LDEV CTG H/M/12 SSID R:Group
PRODUCT_ID

Volume{cec25efe-d3b8-11d4-aead-00c00d003b1e}\Vol3\Dsk0 CL1-B
85002496 56 - - - - DF600F-CM
-fl: Shows a data protection volume with “-CLI ” option by appending an
asterisk (*) to the device file name.
-fg: This option is specified to find host group and to display LUN.
-fw: This option extends the contents of display, and indicates the V-VOL
information to the maximum of MU#. This option is used by combining with the
option of -CLI (see
Figure 1-79 ).
Returned
values The -svinf or -svinfex option returns the following values to distinguish the
execution result from you program:

Normal termination: 0. 
Abnormal termination: 1 (when the execution to the specified device did not
end normally).
Table 1-34: Inqraid Command Parameters (Continued)
Parameter Value