2 Control Functions
Control of Master/Slave group
SMGB0120 rev.0 - 11/2017
46
2.3.6
Method for setting and confirmation of operation conditions through the LCD
screen
Conducts the setting of the control of Master/Slave group and confirmation of operation conditions through the LCD
screen.
In the case of master
unit (unit 1) setting
In the case of slave unit
(units 2 to 8) setting
Set the setting temperature difference (when
the 1st water temperature setting is enabled)
Set the setting temperature difference (when
the 2nd water temperature setting is enabled)
If there are more
than 5 units
connected, shift
to priority setting
screen of units
after unit 5