2. Features and benefits
TCGB0075 rev.0 - 11/2012
41
2
2.5 Control features
2.5.1 Easy to use - New LCD user’s interface (PC-S80TE)
A user-friendly interface control has been designed to supply as accessory for indoor unit alone (without tank) and integra-
ted into the DHW tank for indoor unit with HITACHI tank (Tank integrated over the indoor unit). This controller allows the
remote control of the air to water heat pump by using the “Intelligent” Thermostat (as accessory).
The design of the new user’s interface has the following features:
Few number of buttons
The working mode is very simple, with only 7 buttons that make possible to access to all the display menus.
HITACHI
OK
Buttons description:
•
RUN/STOP unit: Pressing this button, it will be switched ON/OFF the selected zone, or all the unit if there is no
zone selected.
•
OK: Used to select items and confirm the edition of them.
•
4 Arrows: For moving inside the menus and views.
•
Return: Used as a cancel button when editing an item or for going back to the main menu from the global view.
Easy unit configuration
The LCD user’s interface configuration allows the setting of all the values of the air to water heat pump, which are available
for the installer.
It is possible the configuration of the following modes:
•
Space heating
•
DHW
•
Swimming pool
•
Hystorical data
• Synchronizing time with solar DHW system.
•
Optional functions
•
Etc.
N O T E
For more information, please refer to YUTAKI S80 indoor unit Installation and operation manual.