9
Remote control batteries
Open the back of your Roku TV remote control and insert the included batteries, observing the proper orientation as
indicated in the battery compartment. Reattach the back cover.
“
” on page
explains how to use the remote control in each of the TV’s operating modes.
How to install batteries
1.
Open the battery compartment cover.
2.
Install two “AAA” batteries (supplied).
3. IMPORTANT NOTE: Carefully match (+) and (-) indication
on the battery with the (+) and (-) inside the battery
compartment.
4.
Replace the battery compartment cover.
BATTERY PRECAUTIONS
These precautions should be followed when using batteries in this device:
•
The batteries may last approximately one year depending on how much the remote control is used. Replace batteries
when the remote operation becomes erratic.
•
Use only the size and type of batteries specified.
•
Be sure to follow the correct polarity when installing the batteries as indicated in the battery compartment. Reversed
batteries may cause damage to the device.
•
Do not mix different types of batteries together (e.g. Alkaline, Carbon-zinc or Rechargeable) or old batteries with fresh
ones.
•
If the device is not to be used for a long period of time, remove the batteries to prevent damage or injury from possible
battery leakage.
•
Do not try to recharge batteries not intended to be recharged; they can overheat and rupture. (Follow battery
manufacturer’s directions.)
•
Please use caution when inserting batteries to avoid battery damage. If the spring terminal in the remote control
remains in contact with a side of a damaged battery it can cause a short circuit. Never use damaged batteries as they
can become very hot and are dangerous.
•
Never expose batteries (battery pack or batteries installed) to excessive heat such as sunshine, fire or the like.
Summary of Contents for 43R5
Page 11: ...xi Child Safety Notice ...
Page 84: ...72 Memo ...