37
ENGLISH
TROUBLESHOOTING(continued)
Symptom and Check List (continued)
Symptoms Check
list
Page
z
No picture
The Indicating lamp
ĺ
Off
z
Check if the Power Cord is plugged into the socket firmly.
z
Check if the Main Power is ON.
14
,
19
z
No picture
The Indicating lamp
ĺ
Orange
It means that the unit is in “Power Save
mode”.
z
Check if all the cables of the external equipments are connected
correctly and firmly.
z
Check if the power of the external equipments is ON.
z
Check if the TV/AV mode has been selected correctly.
z
Check if the PC is in Power Save mode or not.
z
Refer to “Power Save mode” and “When following messages appears
on the screen”
35
z
No picture
The indicating lamp
ĺ
Green
z
Check if the signal cable is connected correctly and firmly.
z
Adjust the level of Brightness and Contrast lower.
14
~
18
z
The top of the television and surface of
the panel heat up.
z
It may happen when you use the unit for long hours. Turn off the Main
Power of the unit for a while. Please note that this is not malfunction.
39
,
41
z
Image cannot be displayed in the correct
position.
z
Press
button to check if the input signal of the displayed image is
compatible with the specification of the television.
25
,
39
,
41
z
When the VCR is in special playback
features (Fast forward or Rewind), the
screen gets dark and cannot see the
image at all.
z
It could happen when the VCR is connected to Component output,
such as 480i. This is not malfunction.
z
Try Composite output or S-video output and check the picture again.
z
Screen display size cannot be switched
correctly.
z
The display size is fixed at “Full” when the receiving signals are
1080i/60Hz, 1080i/50Hz, 720p/60Hz, or 720p/50Hz.
z
Check the signal status by pressing the
button on the remote
control.
32
,
33
z
Cannot be displayed the image from HDMI.
z
Check if the cables are connected correctly.
z
Check the output format of the equipments.
z
(Please refer to “Connecting Procedure” and “Recommended Signal
List”.)
40
~
41
