Hitachi 37LD9000TA Page 2 User Manual Download

Page: 2 / 41

CONTENTS

IMPORTANT SAFETY INSTRUCTIONS .........................2

INSTRUCTIONS...............................................................3

About This Manual .......................................................3

Trademark Credits........................................................3

About Software .............................................................3

SAFETY PRECAUTIONS ................................................4

About the Symbols .......................................................4

Cleaning and Maintenance...........................................7

ABOUT LCD PANEL .......................................................8

Common phenomena of LCD Panel ............................8

FEATURES ......................................................................9

SUPPLIED ACCESSORIES ............................................9

COMPONENT NAMES ..................................................10

Main Unit ....................................................................10

Remote Control ..........................................................11

PREPARATION..............................................................12

Remote Control Batteries Installation.........................12

Caution When Moving the Main Unit..........................12

Safety Precaution on Main Unit Installation ...............13

Anti-Tumble Measures ...............................................13

CONNECTION................................................................14

Terminal Positions ......................................................14

Connecting Procedure................................................14

BASIC OPERATION ......................................................19

POWER On/Off ..........................................................19

Volume UP/DOWN .................................................... 20

Mute ........................................................................... 20

Input Switching to TV/AV1~4, HDMI, and RGB......... 21

Input Signal Screen Display....................................... 21

MENU OPERATION ...................................................... 22

How to use the On-Screen Display (OSD) system .... 22

Language Menu ......................................................... 22

Setup Menu (TV mode).............................................. 23

Setup Menu (RGB mode) .......................................... 25

Picture Menu (TV/AV mode) ...................................... 26

Picture Menu (RGB mode)......................................... 28

Audio Menu ................................................................ 29

Timer Menu ................................................................ 30

FUNCTION..................................................................... 31

About Teletext ............................................................ 31

Size Switching............................................................ 32

Audio Switching ......................................................... 34

Power Save Mode...................................................... 35

TROUBLESHOOTING................................................... 36

When Following Messages Appear on the Screen.... 36

Symptom and Check List ........................................... 36

PRODUCT SPECIFICATIONS ...................................... 39

Signal Input ................................................................ 40

Recommended Signal List ......................................... 41

IMPORTANT SAFETY INSTRUCTIONS

Read this instruction thoroughly.

Retain this instruction for future reference.

Heed all warnings and cautions to prevent possible danger.

Follow all instructions. Improper handling could cause personal injury and/or serious damage to the unit that may

shorten its service time.

Do not block any ventilation openings.

Install the product in accordance with the manufacture’s instructions.

Before calling for the technical support or service technician, read “TROUBLESHOOTING” ( 36 ~ 38 ) to determine

the symptoms when problems occur during installation or operation of the product.

If serious problems happen (such as smoke or an abnormal odor from the unit), turn off the Main Power, unplug the

Power Cord, and then, contact your local dealer immediately.

Summary of Contents for 37LD9000TA










































Search results

Summary of Contents for 37LD9000TA

Reviews:

Related manuals for 37LD9000TA

Brands by name

Popular brands

Hitachi 37LD9000TA, User Manual

Search results

Summary of Contents for 37LD9000TA

Reviews:

Related manuals for 37LD9000TA

Brands by name

Popular brands