Hitachi 32PD5000 Service Manual Download | Manualshive

Page: 9 / 101

background image

4

32PD5000/42PD5000 (PW1)

9

32PD5000/42PD5000 (PW1)

3. Service points

Lead free solder

This product uses lead free solder (unleaded) to help preserve the environment. Please read these instructions
before attempting any soldering work.

Caution:

Always wear safety glasses to prevent fumes or molten solder from getting into the eyes. Lead free
solder can splatter at high temperatures (600˚C).

Lead free solder indicator

Printed circuit boards using lead free solder are engraved with an "F."

Properties of lead free solder

The melting point of lead free solder is 40-50˚C higher than leaded solder.

Servicing solder

Solder with an alloy composition of Sn-3.0Ag-0.5Cu or Sn-0.7Cu is recommended.
Although servicing with leaded solder is possible, there are a few precautions that have to be taken. (Not taking
these precautions may cause the solder to not harden properly, and lead to consequent malfunctions.)

Precautions when using leaded solder

Remove all lead free solder from soldered joints when replacing components.
If leaded solder should be added to existing lead free joints, mix in the leaded solder thoroughly after the lead

free solder has been completely melted (do not apply the soldering iron without solder).

Servicing soldering iron

A soldering iron with a temperature setting capability (temperature control function) is recommended.
The melting point of lead free solder is higher than leaded solder. Use a soldering iron that maintains a high
stable temperature (large heat capacity), and that allows temperature adjustment according to the part being
serviced, to avoid poor servicing performance.

Recommended soldering iron:

Soldering iron with temperature control function (temperature range: 320-450˚C)

Recommended temperature range per part:

Part

Soldering iron temperature

Mounting (chips) on mounted PCB

320˚C±30˚C

Mounting (chips) on empty PCB

380˚C±30˚C

Chassis, metallic shield, etc.

420˚C±30˚C

FILTER PWB, SW PWB, LED/RECEIVER PWB, TACT SW PWB, SP TERMINAL(L/R) PWB
AUDIO PWB, JOINT PWB
VIDEO PWB (42PD5000MA, 32/42PD5000TA)
TUNER PWB (32/42PD5000TA)

The PWB assembly which has used lead free solder

«
...
7
8
9
10
11
...
»

Summary of Contents for 32PD5000






































































































Reviews:

No comments

Related manuals for 32PD5000

Brand: Panasonic Pages: 76

TH-103PF10UK - 103" Plasma Panel

Brand: Panasonic Pages: 131

Brand: iHealth Pages: 14

MultiSync EA245WMi-BK

Brand: NEC Pages: 30

SyncMaster P2450H

Brand: Samsung Pages: 44

SyncMaster P42H-2

Brand: Samsung Pages: 26

Brand: ItsImagical Pages: 16

WearLink Transmitter Nike+

Brand: Polar Electro Pages: 8

Brand: Uniden Pages: 24

Brand: Sansui Pages: 40

Brand: Eye Sight Technology Pages: 4

Brand: AOC Pages: 64

Brand: Heltec Automation Pages: 30

Galaxy AF-3150 Series

Brand: Daktronics Pages: 87

Brand: TRENDnet Pages: 18

Brand: Abilia Pages: 24

Brand: Planar Pages: 21

ProLite T1731SR-1

Brand: Iiyama Pages: 1

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands