USING THE VIDEO AND AUDIO INPUT JACKS
36
6
Press
CH UP (
)
or
DOWN (
)
to select teh "CH3", "CH4", "INPUT 1", "INPUT 2" or "OFF".
Set model to the input in which your VCR is connected. If done through RF, select either channel 3 or 4 match the
setting of the VCR.
7
Press
MENU
to exit.
USING THE VIDEO AND AUDIO INPUT JACKS
CONNECTING VIDEO EQUIPMENT FOR PLAYBACK OF VIDEO MATERIAL.
• When the television is connected to video equipment as shown below, the material being played back on the
video equipment can be seen on the television screen.
Connecting video device equipped with video output terminal.
CONNECTIONS
* The S-VIDEO INPUT terminals (IN-1) are used to obtain a higher quality image by importing image signal
separated into color and brightness signals.
* The S-VIDEO INPUT terminal is for image signal. Audio signal is to be connected to the IN 1 AUDIO
terminals (left and right).
TO WATCH VIDEO MATERIAL PLAYBACK.
• Press the Remote's
INPUT
to select VIDEO INPUT mode to which the video equipment you want to playback is
