Hitachi 19VR11B Owner'S Manual Download Page 56

Page: 56 / 60

TROUBLESHOOTING GUIDE

TROUBLESHOOTING

GUIDE

If you have followed the instructions contained in this manual and have difficulty in
operating your TV/VCR, locate the SYMPTOM in the left column below. Check the
corresponding POSSIBLE CAUSE and CORRECTIVE ACTION columns to remedy
the problem.

SYMPTOM

POSSIBLE

CAUSE

CORRECTIVE

ACTION

No power.

• AC Power cord is not connected.

• Connect AC power cord

to AC outlet.

• POWER button is set to OFF.

• Set the POWER button

to ON.

No picture and sound. • TV/VCR is not plugged into an

• Plug power cord into an

active

active AC outlet.

AC outlet.

• Antenna is not connected.

• Check antenna

connection.

• No channel in memory.

• Program tuner's

memory.

No picture or poor

• Direction or condition of antenna is

• Adjust direction or

picture on TV/VCR. not adequate.

replace antenna.

• Picture control is not adequate.

• Adjust picture controls.

No sound or poor

• Volume control on remote control

• Adjust volume control

sound.

unit or main unit is in minimum position

on remote control unit or

set.

• MUTE button on the remote control

• Press MUTE button.

unit is in the ON position.

Timer recording is

• The timer recording is set incorrectly.

• Set the timer recording

correctly.

not possible.

• The timer recording is not set to ON.

• Set the timer recording

to ON.

Cannot go into

• The erase-prevention tab on cassette

• Place transparent tape

Record mode.

is missing.

over missing erase-

prevention tab.

Playback picture is

• The TRACKING control is not set

• Adjust TRACKING

partially

noisy.

correctly.

control

for

better

picture.

Noise in picture on

• Video heads are dirty.

• Head cleaning is

playback.

necessary,

consult

the

nearest

Service

Center.

No operation by

• No power to TV/VCR.

• Make sure the AC cord

infrared

Remote

connected

Control.

outlet.

•

Weak

batteries.

•

Check

the

batteries

infrared Remote

Control.

CLOSED CAPTION

POSSIBLE REMEDY

PROBLEM

My TV/VCR is showing

You are watching a live broadcast and spelling errors

captions that are misspelled made by the closed captioning production company

may pass through uncorrected. A prerecorded program

will not show any misspelled words because of the

normal time available for editing the captions.

My TV/VCR will not show Captions that are delayed a few seconds behind the the
text in its entirety or there

actual dialogue are common for live broadcasts. Most is

Summary of Contents for 19VR11B





























































Search results

Summary of Contents for 19VR11B

Reviews:

Brands by name

Popular brands

Hitachi 19VR11B, Owner'S Manual

Search results

Summary of Contents for 19VR11B

Reviews:

Brands by name

Popular brands