TIMER
53
1) Press POWER button so that the REC indicator goes off.
2) Press MENU button to point to "TIMER PROGRAMMING".
3) Press SELECT button.
4) Select a program number you want to check using CH
or
button. The details of
selected program appears on the TV screen.
5) Press MENU button. The TV screen returns to the TV mode.
HINTS FOR AUTOMATIC TIMER AND VCR PLUS TIMER
RECORDINGS
•
Make sure the channel you want to record is properly set in advance.
•
It is not necessary to press REC button for timer recording.
•
Recording begins automatically at the set of the Start time.
•
If you are recording using a Timer mode, you may not operate the unit manually.
•
The erase-prevention tab on the cassette must be in place (or you must put tape over the
hole).
•
If the erase protection tab is removed, the cassette will be ejected when the POWER button
is pressed to off.
•
If the tape runs out before the end time, the TV/VCR will switch to the Stop mode
immediately, and the tape will be ejected.
AUTO RETURN
With this feature, after timer recording has finished, the beginning of the recorded
program(s) can be located automatically.
1 Select "USER'S SET UP"
Press MENU button repeatedly to point to "USER'S SET UP".
Press SELECT button.
2 Set "AUTO RETURN" to [ON]
Press MENU button repeatedly to point to "AUTO RETURN".
Press CH
or
button repeatedly until [ON] appears.
3 Exit the auto return mode
Press MENU button repeatedly to return to the TV mode.
4 Auto Return will begin
When all the timer recordings are completed, the TV/VCR will rewind to the
beginning of the recorded program(s).
NOTES:
•
If you press POWER button during rewinding a tape, the Auto Return will be stopped.
• The Counter Memory function does not operate in this mode.
Summary of Contents for 19VR11B
Page 12: ...VIDEO CASSETTE 12 tape ...
