Hisun AXIS 110, Owner'S Manual, Page: 88 / 116

8-26 Periodic Maintenance and Adjustment
cylinder on calipers for blockage. Inspect calipers for any deformation
2
Brake performance
degradation
1. Check if the brake disc wear limit has been exceeded. Replace disc if
necessary
2. Check whether the rotors or the disc brake pads have worn beyond limits
or are contaminated by oil or other material which could reduce the braking
performance. Change parts if necessary
3. Check brake lines for leaks. Change brake lines if necessary.
4. Inspect push rod to master cylinder. Replace master cylinder if
deformed.
5. Check if brake lines have any air. If they do, use special brake bleeding
tools to remove air.
6. Check to see if there is sufficient brake fluid in brake reservoir. Brake
fluid should be above the minimum mark.
3
When driving, front or
rear brakes make sound
or brake discs or rotors
turn red because of heat 1. Check if brake discs are deformed. Replace if needed.
2. Check hydraulic cylinder on brake calipers for blockage, and
calipers for deformation. Replace if needed.
Sheet 3: Electrical system troubleshooting
S/N
Problems
Solutions
1 Lights not working
1. Check to be sure the light switch is working. Replace if needed
2. Check to see if wires are damaged. Replace if needed
3. Check to see if the lights are damaged or blown out. Replace if